Canada: Solar Panel Critter Guard Mesh for Trade Buyers
Short answer: We are a manufacturer in Anping, Hebei, China, and we supply solar panel critter guard mesh to trade buyers in Canada — galvanised steel with black PVC coating in 1/2″ (12.7 mm) welded mesh, stainless steel options, and clip sets in stainless, aluminium or nylon. Rolls are 100 ft (30 m) long and come in 4″, 5″, 6″ and 8″ (about 100, 125, 150 and 200 mm) widths, and standard sizes start at 10 rolls with mixed sizes allowed. We do not publish a delivery time for Canada: request a delivered (DDP) quote for Canada and we will put freight on a separate line with its own amount.
What a Canada critter guard order from us covers

Canadian buyers usually come to us for the same item under several names: critter guard, solar panel bird mesh, squirrel guard. It is one product — a welded wire mesh roll that closes the gap between the panel frame and the roof surface, so pigeons, rodents and squirrels cannot get under the array. The mesh is 1/2″ (12.7 mm) opening, black PVC coated, and the standard base wire is galvanised steel.
An order covers the mesh rolls themselves and the clip sets that hold them. Each roll ships with 60, 80 or 100 clip sets — 100 by default. The stainless clip is a J-shaped hook wire that hooks over the panel frame and passes through the mesh, with a black retaining disc pressed onto the wire to hold the mesh tight; the disc has a star cut and comes in large and small sizes.
For Canadian distributors and wholesalers, the order can also cover your own labelling: a plain carton with your logo sticker is free, and a printed colour box is charged at printing cost with no minimum.
For comparable market detail on how installers buy this item, see the critter guard mesh trade buyer guide and the 6-inch critter guard mesh spec sheet.
What you can have made to your own spec

Seven sizes are standard: 1.0 mm wire in 4″, 6″ and 8″; 1.3 mm wire in 5″, 6″ and 8″; and 1.2 mm wire in 8″. If those do not match how your crews work, custom sizes are available on request — for example 200 mm × 30 m, or 16″ high mesh, both of which are made to order.
Material is the bigger decision. Galvanised steel with black PVC coating is the standard base material. Stainless is available in two forms: stainless wire with black PVC coating, or uncoated 304 stainless. For long-life specifications, 316 stainless mesh can be made with a 25-year warranty (free replacement mesh). That warranty applies only to the 316 mesh — the galvanised version does not carry it.
Clip material is a separate choice. Stainless steel matches a stainless or long-life mesh. Aluminium is a metal option, and nylon is UV-resistant and non-conductive, which suits work where no metal is wanted against the panel frame.
If you sell into coastal or high-salt regions, read the stainless mesh guidance for coastal solar sites and the PVC-coated steel versus stainless comparison before fixing a single material across your range.
Options and specifications

The table below sets out the options against where each one fits. Sizes are inches with millimetres in brackets; roll length is 100 ft (30 m) for all sizes.
| Option | Wire / material | Sizes available | Where it fits |
|---|---|---|---|
| Galvanised, black PVC coated | 1.0 mm after coating | 4″ (100 mm), 6″ (150 mm), 8″ (200 mm) × 100 ft (30 m) | General rooftop work in stock sizes |
| Galvanised, black PVC coated | 1.2 mm after coating | 8″ (200 mm) × 100 ft (30 m) | 8″ gap with a heavier wire than 1.0 mm |
| Galvanised, black PVC coated | 1.3 mm after coating | 5″ (125 mm), 6″ (150 mm), 8″ (200 mm) × 100 ft (30 m) | Heavier duty galvanised roll; one roll per carton |
| Stainless, black PVC coated | Stainless wire, PVC coated | Made on request | Long-life work where black finish and stainless wire are both wanted |
| 304 stainless, uncoated | 304 stainless | Made on request | Bare metal finish; about one week to produce |
| 316 stainless | 316 stainless | Made on request | Specified where a 25-year warranty (free replacement mesh) is required |
| Stainless steel clip set | J-shaped stainless hook wire + black retaining disc, large or small | 60, 80 or 100 sets per roll | Standard pairing with stainless or long-life mesh |
| Aluminium clip set | J-hook with oval washer | 60, 80 or 100 sets per roll | Metal clip option |
| Nylon clip set | UV-resistant, non-conductive | 60, 80 or 100 sets per roll | No metal contact against the panel frame |
| Custom size | As quoted | e.g. 200 mm × 30 m, 16″ high | Gaps outside the seven standard sizes |
Mesh opening is 1/2″ (12.7 mm) across every option. Clip sets weigh about 0.5 kg per 100 for stainless and about 0.7 kg per 100 for aluminium.
Explore Options

Lightest standard roll for narrow gaps on pitched roofs.
Details · Request a Quote

Stock size that covers most residential gaps.
Details · Request a Quote

Stock size for wider gaps and stepped roof profiles.
Details · Request a Quote

Heavier wire for short runs where stiffness matters.
Details · Request a Quote

Stock size for crews that prefer a stiffer roll.
Details · Request a Quote

Stock size for wide gaps on commercial and metal roofs.
Details · Request a Quote

8″ width in a wire gauge between 1.0 mm and 1.3 mm.
Details · Request a Quote

Long-life work where black finish and stainless wire are both wanted.
Details · Request a Quote

Bare metal finish, made to order in about one week.
Details · Request a Quote

Specified where a 25-year warranty (free replacement mesh) is required.
Details · Request a Quote

Pairs with stainless or long-life mesh for a matching finish.
Details · Request a Quote

Metal clip option in J-hook form.
Details · Request a Quote

Non-conductive option with no metal contact against the frame.
Details · Request a Quote

For gaps that fall outside the seven standard sizes.
Details · Request a Quote
Where it is used on Canadian rooftops

On Canadian rooftops, the array sits on pitched roofs covered in asphalt shingles or standing-seam metal, and on flat commercial roofs with membrane. In all three the failure point is the same: the gap between the bottom rail of the panel frame and the roof surface. That is where birds and squirrels get in, and that is what the critter guard closes.
The pests that drive the call are mostly pigeons and other cavity-nesting birds in urban and suburban areas, plus squirrels, which are common across much of the country and are the reason many buyers use the squirrel guard name. Rodents also work along the underside of the array. Once an animal is established under the panels, the debris and nesting material can become a maintenance problem for the cleaning crew, so a closed gap is easier to manage than a recurring clean-out.
Snow load matters in many Canadian markets. The mesh runs along the lower edge of the array, so it needs to sit flush to the roof without catching drifting snow or ice, and it needs to hold without relying on weight. The hooks and discs attach to the panel frame rather than resting on the roof surface.
If you are dealing with repeat call-outs, the maintenance symptom and fix guide and the guide to stopping birds nesting under panels explain what your customer will see before and after fitting.
Key trade-offs when choosing

Wire gauge is a trade-off between wire weight and handling. Per-roll weights (excluding clips) are 1.75 kg for 1.0 mm × 4″, 2.6 kg for 1.0 mm × 6″, 3.4 kg for 1.0 mm × 8″, 4.5 kg for 1.2 mm × 8″, and 4.5 kg for 1.3 mm × 8″ when one roll is packed per carton (3.8 kg for 1.3 mm × 5″, 5.8 kg for 1.3 mm × 8″ in its own carton). If your crews carry rolls up ladders and across roofs by hand, the lighter gauges are the easier carry.
Material is the second trade-off, and it is best set by site conditions. Stainless is generally associated with better corrosion resistance, but we have no salt-spray data, so treat that as general industry knowledge rather than a tested figure. Only the 316 mesh carries the 25-year warranty (free replacement mesh).
Width is often over-specified. A 4″ or 5″ roll covers a standard gap, while 6″ and 8″ rolls cover wider gaps and step-ups on tile and metal roofs. Buying the widest roll for every job adds weight and cost per metre of covered edge; buying too narrow a roll forces overlap and extra clips. Match width to the gap, not to the category of the roof.
Clip choice has a real effect on the finished job. Stainless suits stainless and long-life mesh; nylon avoids metal contact against the frame and is UV-resistant; aluminium is the third metal option. For frameless or unusual frame profiles, read mesh clips for frameless panels and the critter guard clip trade guide before you commit a pallet to one clip type.
Finally, buying by weight or by roll count changes your carton and freight math. Under 50 rolls ship in cartons; 50 rolls and above go on pallets. Some 1.0 mm sizes pack two rolls per carton and 1.3 mm packs one roll per carton, so plan storage around carton counts rather than roll counts.
Packing, lead time and fitting

Standard sizes have a 10-roll minimum order, and you can mix sizes to reach it. Stock lines are 6″ and 8″ in 1.0 mm and 1.3 mm galvanised wire, which ship once confirmed. Stainless — 304 and 316 — is made to order from 10 rolls and takes about one week to produce. Three rolls of stainless cannot be run.
Each roll ships with its clip sets, 100 by default. Cartons carry your logo sticker free; printed colour boxes are at printing cost with no minimum. For Canada we do not quote a delivery time — request a delivered (DDP) quote for Canada and freight will appear as a separate line with its own amount, so you can see product and delivery separately when you set your own landed cost.
Fitting is the same on Canadian roofs as anywhere: the clip hooks onto the panel frame, passes through the mesh, and the retaining disc presses on to trap the mesh against the frame. The mesh then sits flush to the roof surface along the lower edge and is trimmed with pliers where it meets the next panel or a roof obstruction. Do not drill or fix into the panel frame beyond what the panel maker permits — follow the panel manufacturer’s instructions on mounting and any roof-work safety rules that apply in your province.
Installation videos and written instructions are available for your crews; the critter guard installation page and the installation guide walk through the sequence. Kits with mesh and clips together are covered in the critter guard roll kit supply page if you prefer to sell a single SKU.
How a custom order works

Start with one free sample roll — you pay the freight, and stock samples ship the same day. Use it to check wire gauge, width, clip type and finish against what your installers already use, then confirm the sizes you want to keep in stock.
From there we confirm your size mix, clip type and packing (plain cartons with your sticker, or printed colour boxes), and quote. Payment for small orders can be by PayPal, otherwise bank transfer; larger orders run on 30% deposit with 70% before shipping. Cash on delivery is not accepted.
If you sell under your own name, read OEM and private label before your first branded run, and if you are quoting on a delivered basis, the shipping and DDP page explains how freight is handled. These also help when your own customers ask where the mesh is made: Fangyi Hardware as the manufacturer.
What to tell us when you ask for a quote

Give us these details and we can quote without going back and forth:
- Product name you use — critter guard, solar panel bird mesh or squirrel guard — and the sizes and wire gauges, in inches or mm.
- Quantity in rolls, and whether you want a mixed-size pallet or one size.
- Material: galvanised black PVC, coated stainless, uncoated 304 or 316 stainless.
- Clip type and sets per roll: stainless, aluminium or nylon, 60, 80 or 100.
- Packing: plain carton with your sticker or printed colour box.
- Delivery country and postcode for the door-to-door quote — request a delivered (DDP) quote for Canada.
- Any custom width or height you need, and your target date for the first order.
Send those through the quote request page or to sales@birdguardmesh.com and we will come back with a written quote. If you want to see pricing structure first, the cost guide and the bulk price guide explain what drives it.


FAQ
Do you ship solar panel critter guard mesh to Canada?
Yes, we supply trade buyers in Canada. We do not publish a delivery time for Canada, so request a delivered (DDP) quote for Canada and freight will be shown as a separate line with its own amount.
What is the minimum order for Canada?
The minimum is 10 rolls for stock sizes, and you can mix sizes to reach it. Stainless steel is made to order from 10 rolls.
What sizes are standard?
Seven sizes are standard: 1.0 mm in 4", 6" and 8"; 1.3 mm in 5", 6" and 8"; and 1.2 mm in 8". All are 100 ft (30 m) rolls with a 1/2" (12.7 mm) mesh opening. Custom sizes such as 200 mm × 30 m or 16" high are available on request.
Which clip types can I get?
Stainless steel, aluminium or UV-resistant nylon, in sets of 60, 80 or 100 per roll, with 100 as the default.
Does the mesh carry a warranty?
316 stainless mesh can be supplied with a 25-year warranty (free replacement mesh). Galvanised mesh does not carry this warranty.
Can I have my own cartons and branding?
Yes. Plain cartons with your logo sticker are free, and printed colour boxes are charged at printing cost with no minimum order.
How is the mesh fitted?
The clip hooks onto the panel frame, passes through the mesh, and the retaining disc presses on to trap the mesh against the frame, with the mesh sitting flush to the roof. Follow the panel maker's instructions and local roof-work safety rules.
Request a Quote
Send your drawing or size list, the quantity and the delivery country, and we will reply with options and a quote. Request a quote.