6 Inch 304 Stainless Steel Solar Panel Bird Mesh for Trade Buyers
Short answer: 6 inch 304 stainless steel solar panel bird mesh is a welded mesh with a 12.7 mm (1/2 inch) opening, supplied in 6 inch (about 150 mm) width, with either a black PVC coating over stainless wire or uncoated 304 stainless, in 100 ft (30 m) rolls. It closes the gap between the panel frame and the roof so pigeons, rodents and squirrels cannot nest underneath. The 6 inch × 100 ft size is common in the US. Orders start at 10 rolls, and stainless steel is made to order from 10 rolls, with production of 304 and 316 stainless taking about one week.
This page covers what a 6 inch 304 stainless order includes, the custom options, the specification table, where it is used, the trade-offs to weigh, packing and lead time, and how a custom order runs from enquiry to delivery. If you already know the width you need, the solar panel bird mesh width guide explains how width is matched to the gap, and the stainless steel solar panel bird mesh page compares the stainless grades.
What a 6 Inch 304 Stainless Steel Solar Panel Bird Mesh Order Covers

An order is built from three parts: the mesh roll, the clips and the packing. The mesh is welded wire with a 1/2 inch (12.7 mm) square opening. The 6 inch width is about 150 mm. The roll length is 100 ft (30 m). The stainless option can be supplied as stainless wire with a black PVC coating, or as uncoated 304 stainless. Both are made to order from 10 rolls; 3 rolls are not enough for a stainless run.
The clip set is what holds the mesh to the panel frame. Clip sets are supplied in stainless steel, aluminium or UV-resistant nylon, in packs of 60, 80 or 100 per roll, with 100 sets as the default. The stainless clip is a J-shaped stainless hook wire with a black retaining disc that has a star cut in the centre; the discs come in large and small sizes. The clip is hooked onto the panel frame, passed through the mesh and locked with the disc, so the mesh sits tight along the panel edge.
Orders also include the packing. Standard packing is a plain carton with your logo sticker applied, at no extra charge. Custom printed colour boxes are available at the printing cost with no minimum order. For a trade buyer building a branded line, that means the roll and clip sets can arrive under your own label, and the OEM and private label page sets out how that works.
A first order can be tested with a free sample roll; the buyer pays the freight and stock samples can ship the same day. That lets an installer or distributor fit the 6 inch stainless mesh on one array before committing to a full order. See the sample request and MOQ page for the order levels.
What You Can Customize on 6 Inch 304 Stainless Steel Solar Panel Bird Mesh

The 6 inch width is one of the standard widths; the range is 4, 5, 6 and 8 inch, about 100, 125, 150 and 200 mm. If a job needs a different height, non-standard sizes such as 200 mm × 30 m or 16 inch high can be made to order. The roll length is normally 100 ft (30 m). The mesh opening stays at 1/2 inch, because that is the welded pattern the mesh is built on.
Wire diameter after coating is 1.0 mm, 1.2 mm or 1.3 mm. The standard 7 sizes use 1.0 mm in 4, 6 and 8 inch, 1.3 mm in 5, 6 and 8 inch, and 1.2 mm in 8 inch. For 6 inch stainless, the wire diameter choice follows the same pattern: 1.0 mm or 1.3 mm are the standard sizes to plan around, and other combinations can be quoted as a custom run.
The stainless finish is a choice in itself. Black PVC-coated stainless wire gives a low-visibility black finish that matches most panel frames and roof lines. Uncoated 304 stainless shows the bare metal and is often chosen where the buyer wants no coating on the wire. Neither finish changes the mesh pattern or the clip system. The PVC-coated steel vs stainless comparison explains where each finish is normally used.
Clips can be matched to the job. Stainless clips suit a stainless mesh order and give a consistent metal finish along the frame. Aluminium clips are also metal and are about 0.7 kg per 100 sets against about 0.5 kg per 100 sets for stainless. Nylon clips are UV-resistant and non-metallic, which matters where the installer wants no metal contact with the panel frame. The solar panel mesh clips page and the critter guard clips trade buyer guide cover the clip choices in detail.
Packing can be customised too: a carton with your logo sticker is free, and a printed colour box is charged at the printing cost. Kits can be put together with mesh and clips in one pack for installers who prefer a single unit on site; see the solar bird mesh kit page.
Options and Specifications

The table below shows how the 6 inch width sits against the other standard widths and which jobs each one typically fits. It is a planning table for trade buyers, not a fixed order form; custom sizes are quoted on request.
| Width | Approx. size | Typical use | Wire diameter after coating |
|---|---|---|---|
| 4 inch | 100 mm | Narrow frame-to-roof gaps on compact arrays | 1.0 mm |
| 5 inch | 125 mm | Mid-size gaps where a 6 inch roll would sit too deep | 1.3 mm |
| 6 inch | 150 mm | Standard domestic arrays; common US size at 6 inch × 100 ft | 1.0 mm or 1.3 mm |
| 8 inch | 200 mm | Deeper gaps and larger arrays; 200 mm × 30 m is common in Australia and the UK | 1.0 mm, 1.2 mm or 1.3 mm |
| Custom | e.g. 200 mm × 30 m, 16 inch high | Non-standard gaps or roll lengths, quoted per order | On request |
Mesh specification for the 6 inch stainless option:
- Mesh type: welded wire, 1/2 inch (12.7 mm) opening
- Roll length: 100 ft (30 m)
- Stainless options: black PVC-coated stainless wire, or uncoated 304 stainless
- 316 stainless: available with a 25-year warranty (free replacement mesh); this warranty applies to 316 mesh only and is not offered on galvanised or 304 mesh
- Clips: stainless, aluminium or UV-resistant nylon; 60, 80 or 100 sets per roll, 100 by default
- Clip weight: 100 stainless sets about 0.5 kg; 100 aluminium sets about 0.7 kg
- PVC coating: third-party RoHS tested (DN Testing, 13 Aug 2026, cert. DNT2607064702C09233-12150C) and UL94 V-0 tested (CTIC, 23 May 2024, report CTICAK2252488450523110AR)
If a project calls for the higher grade, ask about 316 stainless mesh with the 25-year warranty (free replacement mesh). It is quoted separately and carries the warranty that the galvanised and 304 mesh do not. The galvanised solar panel bird mesh rolls page covers the galvanised version for price-led jobs.
Where 6 Inch 304 Stainless Steel Solar Panel Bird Mesh Is Used

The mesh is fitted along the lower edge of a solar array, between the panel frame and the roof surface, to close the gap. Pigeons and other birds, mice and squirrels use that gap to nest under the panels, and nesting material plus droppings create maintenance work and can affect airflow under the array. Closing the gap is the straightforward fix, and the guide to stopping birds nesting under solar panels sets out the problem and the approach.
For trade buyers, the 6 inch × 100 ft roll is a common size in the US. The 6 inch and 8 inch galvanised rolls in 1.0 mm and 1.3 mm are held in stock and ship once confirmed, while the stainless 6 inch is made to order from 10 rolls. The Australia installers and contractors supplier page explains how that mix works for trade accounts.
The stainless option is chosen where the buyer wants a metal mesh that is expected to hold up in damp or coastal conditions. There is no salt-spray test result to quote, so the case for stainless rests on general industry knowledge about stainless wire and on the buyer’s own site conditions, not on a specific test figure. Where coastal corrosion is the main concern and the project budget allows, 316 with the 25-year warranty (free replacement mesh) is the grade to discuss; the stainless steel mesh page covers the difference between 304 and 316.
The same mesh system is used by solar cleaners and pest-control companies as part of a maintenance or proofing service. For pest controllers, the clip-plus-mesh method is quick to fit and does not require drilling the panel frame. The pigeon proofing supplies for pest controllers page covers that trade channel. Installation guidance for roof work is on the installation guide; always follow the panel manufacturer’s instructions and local safety rules for working on roofs and around panels.
Key Trade-offs When Choosing 6 Inch 304 Stainless Steel Solar Panel Bird Mesh

304 stainless vs galvanised. Galvanised mesh with black PVC coating is the standard material and is stocked in 6 and 8 inch in 1.0 mm and 1.3 mm, so it ships quickly. Stainless is made to order from 10 rolls but gives a metal that is generally chosen for longer life in wet conditions. There is no salt-spray test on file, so treat the stainless advantage as general industry knowledge rather than a tested figure. If the job is price-led and inland, galvanised is usually enough; if the buyer wants stainless, plan for the 10 roll minimum.
PVC-coated stainless vs uncoated 304. The black PVC coating keeps the mesh visually consistent with panel frames and roofing, and the coating is RoHS and UL94 V-0 tested. Uncoated 304 shows bare stainless and has no coating to wear. Some buyers prefer no coating for a clean metal look; others prefer the black finish for kerb appeal. Neither changes how the mesh is fixed. The finish comparison is the place to settle this.
1.0 mm vs 1.3 mm wire. Both are available on the 6 inch width. A 1.0 mm × 6 inch roll weighs about 2.6 kg excluding clips, which suits lighter handling. A 1.3 mm × 6 inch carton is 300 × 300 × 160 mm and 4.5 kg gross excluding clips. The choice between them is about the wire gauge specified for the job and the weight each roll adds on site. Match the wire to how much handling the mesh will see on site.
Clip material. Stainless clips give a matching metal finish with stainless mesh and weigh about 0.5 kg per 100 sets. Aluminium is also metal and about 0.7 kg per 100 sets. Nylon is UV-resistant and non-metallic, which some installers prefer where they want to avoid metal-to-frame contact. Whichever clip is chosen, the fitting method is the same, and the clips for frameless panels page covers frames without a standard lip.
Common mistakes. One common mistake is ordering a width that does not match the frame-to-roof gap; measure the actual gap before choosing 4, 5, 6 or 8 inch. Another is ordering stainless without allowing for the 10 roll minimum. A third is fitting the mesh with too few clips, so the mesh sags between fixing points; the default 100 sets per roll avoids that on normal runs. If mesh comes loose after fitting, the loose mesh page explains the usual causes.
Packing, Lead Time and Fitting for 6 Inch 304 Stainless Steel Solar Panel Bird Mesh

Packing depends on the wire diameter. The 1.0 mm mesh is packed two rolls per carton, so 10 rolls makes 5 cartons. The 1.3 mm mesh is packed one roll per carton; a 1.3 mm × 6 inch carton measures 300 × 300 × 160 mm and weighs 4.5 kg gross excluding clips, which is the closest standard to a 6 inch 1.3 mm roll. Under 50 rolls ship in cartons; 50 rolls and above go on pallets. Standard cartons carry your logo sticker at no charge, and printed colour boxes are charged at the printing cost.
Roll weights excluding clips for planning: 1.0 mm × 4 inch 1.75 kg, 1.0 mm × 6 inch 2.6 kg, 1.0 mm × 8 inch 3.4 kg and 1.2 mm × 8 inch 4.5 kg. For 6 inch 1.0 mm, plan around 2.6 kg per roll before clips. For a mixed pallet, the critter guard wholesale page explains how mixed-size orders are built.
Lead time: stock galvanised 6 and 8 inch in 1.0 mm and 1.3 mm ships once confirmed. Stainless 304 and 316 take about one week to produce. Delivery can be arranged door to door with duties paid (DDP); to Australia the typical time from payment to your door is about 6–8 weeks, of which about 30–35 days is at sea, with booking, loading, clearance and delivery on top. Freight is quoted as a separate line with its own amount, so the goods price and freight are clear. The shipping and DDP page covers the route detail.
Fitting the mesh is a site task that any competent installer can do: cut the roll to length, bend it to follow the frame, hook the J-shaped wire onto the panel frame, pass it through the mesh, press the retaining disc on with pliers and trim the excess. Installation videos and written instructions are available, and the installation resources page collects them. For cyclone-prone regions, follow the local fixing guidance in the cyclone-prone installation guide. Before any roof work, follow the panel manufacturer’s instructions and local safety rules.
How a Custom Order for 6 Inch 304 Stainless Steel Solar Panel Bird Mesh Works

Custom orders start with the site requirement: width, wire diameter, finish (coated or uncoated stainless), clip material and packing. Send those with the roll quantity and the delivery postcode, and you receive a written quotation with the goods and freight shown separately. Minimum order is 10 rolls for stock sizes, and stainless steel is made from 10 rolls; mixed sizes can be combined to reach the minimum. Payment can be by PayPal for small orders or by bank transfer; larger orders can run 30% deposit with 70% before shipping. Cash on delivery is not accepted.
Production follows once the order and packing are confirmed. Stainless 304 takes about one week. Custom printed cartons and logo stickers are handled at the same stage, with the logo sticker free and the printed box charged at printing cost. If you need a sample first, one roll is free with freight paid by the buyer, and stock samples can ship the same day. The how to order page walks through the steps, and the bulk order and direct factory page covers volume planning.
We are a manufacturer, not a trading company, working from a 5,600 m² production site in Anping, Hebei, China’s main wire mesh area. The same factory also makes other wire products and exports to Southeast Asia, the Middle East, Europe and the Americas. The manufacturer page gives the background. As a factory we also supply other factories in China with mesh, so trade buyers are dealing with the source.
For a quote on 6 inch 304 stainless, send the width, wire diameter, finish, clip material and delivery details through the quote request form, or use the delivered price calculator for an initial estimate. If you are comparing stainless with galvanised at volume, the wholesale solar bird guard mesh page and the cost guide help you weigh the two. For a full trade overview, the solar panel bird wire buyer guide covers the whole category.
Roof work carries risk: fit the mesh safely, use the right access equipment and follow the panel maker’s mounting instructions and local safety rules. For panel warranty questions, check with the panel manufacturer before attaching anything to the frame.



FAQ
What sizes does 6 inch 304 stainless steel solar panel bird mesh come in?
The 6 inch width is about 150 mm, and the standard roll length is 100 ft (30 m), with a 1/2 inch (12.7 mm) welded opening. The standard 6 inch sizes use 1.0 mm or 1.3 mm wire after coating. Custom sizes such as 200 mm × 30 m or 16 inch high can be made to order.
What is the difference between coated stainless and uncoated 304 stainless?
Both use a 12.7 mm welded mesh in a 6 inch width. The coated option has black PVC over stainless wire for a low-visibility black finish that matches most panel frames. The uncoated option shows bare 304 stainless with no coating. Neither changes the clip system or how the mesh is fitted.
What is the minimum order for stainless steel mesh?
Stainless steel is made to order from 10 rolls, and 3 rolls are not enough for a stainless run. Stock galvanised sizes start at 10 rolls and mixed sizes can be combined to reach the minimum.
How long does production and delivery take?
304 and 316 stainless take about one week to produce. Door-to-door DDP delivery to Australia typically takes about 6–8 weeks from payment, with about 30–35 days of that at sea. Freight is quoted as a separate line.
Can I get the mesh with my own branding?
Yes. Standard cartons can carry your logo sticker at no extra charge. Custom printed colour boxes are available at the printing cost with no minimum order.
Does the 25-year warranty cover 304 stainless mesh?
No. The 25-year warranty (free replacement mesh) applies to 316 stainless mesh only. It is not offered on 304 stainless or galvanised mesh.
How is the mesh fixed to the panel frame?
A J-shaped hook wire is hooked onto the panel frame, passed through the mesh and locked with a black retaining disc pressed on with pliers. Clips come in stainless, aluminium or UV-resistant nylon, in 60, 80 or 100 sets per roll with 100 as the default.
Request a Quote
Send your drawing or size list, the quantity and the delivery country, and we will reply with options and a quote. Request a quote.