Installation guide

How to Install Solar Panel Bird Mesh (Step-by-Step, with Video)

Pigeons nest under solar panels because the gap between the panel frame and the roof gives them a sheltered ledge. Solar panel bird mesh closes that gap around the edge of the array, so pigeons, rodents and squirrels cannot get under the panels to nest. Each clip is a J-shaped wire hooked onto the panel frame, passed through the mesh and locked with a retaining disc, so there is no drilling into the panel. Measure the gap, choose the width, then clip and trim.

No drilling into the panelHand tools: pliersVideo below100 clip sets per roll
Step 3: the disc holds the mesh tight against the panel frame
Video

Installation video

A 19-second clip showing the stainless steel clip: hook, disc and trim.

Before you start

Measure and choose

  • Measure the gap: measure from the panel edge to the roof surface all around the array.
  • Choose the width: pick a width that covers the gap with room to fold and fix. Most homes use 150mm (6") or 200mm (8"); low mounts use 100mm (4").
  • Choose the wire: 1.0mm for most homes; 1.3mm for strong pest pressure or harsh weather; stainless for coastal sites.
  • Clips: each 30m roll comes with 100 clip sets by default; 60 or 80 on request.
Steps

Fitting the clips, step by step

Photos taken from our installation video.

Steps

Step-by-step

  1. Roll out the mesh along the edge of the array, with the top edge against the panel frame.
  2. Hook the J-wire onto the panel frame and pass the straight end through the mesh.
  3. Press on the retaining disc with pliers so it holds the mesh tight against the frame.
  4. Repeat along the edge with the clips supplied (100 sets per roll).
  5. Trim the excess wire and mesh with pliers.
FAQ

Installation questions

Do I need to drill into the panels?

No. The clips hook onto the panel frame, so there is no drilling into the panel.

Which clip is shown in the video?

The stainless steel clip: a J-shaped stainless wire with a black retaining disc. Aluminium and nylon clips are also available.

Can you send installation instructions?

Yes. We can send installation videos and instructions with your order.

Which width should I order?

Measure the gap from panel edge to roof. Most homes use 150mm (6") or 200mm (8").

Products

What you need

Get a quote

Tell us the mesh width, wire diameter, quantity and your delivery postcode. Pricing depends on width, wire diameter, material, quantity and freight, and each order is quoted separately. We reply with a delivered price. For Australian postcodes you can also work out the delivered price now.

Anping County Fangyi Wire Mesh Products Co., Ltd. (FANGYI) · Anping County, Hebei, China · Phone / WhatsApp +86 133 3308 9972

Last updated: 2026-10-22

Privacy Policy

Get a factory quote

4 quick fields. We reply by email or WhatsApp.